Warehousing & Distribution Industrial Hygiene Testing
Worker exposure and facility air monitoring for warehouses, distribution centers, fulfillment operations and cold storage — diesel exhaust, ammonia refrigeration, noise, dust and indoor air quality analyzed in-house at our Houston lab, with 1-day rush and kits shipped anywhere in the U.S.
Why Logistics Operators Run Their Monitoring With Us
Accredited & Defensible
AIHA-LAP analysis that holds up with OSHA, insurers and corporate EHS audits.
Warehouse-Specific
Diesel exhaust, ammonia refrigeration and dock-area hazards — the exposures specific to logistics facilities.
In-House, One Lab
Every analyte under one roof, one chain of custody, consistent methods across every facility.
1-Day Rush
Same-day log-in before 2 PM CST and rush to 1 business day when a result is time-sensitive.
Air Monitoring for Warehouses, Distribution Centers & Cold Storage
Warehousing and distribution facilities carry a distinct exposure profile driven by material-handling equipment and building systems rather than a manufacturing process — diesel and gas-powered forklifts and yard trucks at loading docks, ammonia refrigeration in cold-storage facilities, conveyor and dock noise, dust from bulk storage and damaged-pallet cleanup, and indoor air quality for the office and break-room space built into most warehouse shells. AGT Labs is the accredited industrial hygiene lab behind that monitoring, analyzing every sample in-house in Houston.
Distribution networks span every state, and the standards don't change with the zip code. We serve facilities anywhere in the United States — kits ship out, samples come back by prepaid return label, and analysis is identical wherever it was collected.
Looking for a regional testing partner in Texas?
This page covers the analytes and lab methods for warehousing & distribution as an industry, wherever your facility is located. For on-site sampling, courier pickup and equipment-loan support in North Texas, see our Dallas-Fort Worth page; in South-Central Texas, see our San Antonio page. Every sample, from any location, is analyzed at the same accredited Houston lab.
- Diesel particulate matter & CO by NIOSH 5040 / direct-read
- Ammonia refrigeration monitoring by NIOSH 6015
- Noise dosimetry for dock, conveyor and material-handling areas
- Total and respirable dust; bulk storage and pallet cleanup
- Mold and indoor air quality (AIHA-EMLAP) for office/break areas
- Asbestos (NVLAP bulk PLM; PJLA PLM/PCM) for legacy warehouse buildings
What We Analyze for Warehousing & Distribution Sites
Every analyte below is run in-house under accreditation. Tap any card for the full method detail on our service pages.
Diesel Particulate & CO
NIOSH 5040 for diesel exhaust; direct-read or sorbent tube for carbon monoxide.
View Service →Ammonia (Refrigeration)
NIOSH 6015 for cold-storage machine rooms and dock/floor areas.
View Service →Noise Dosimetry
Personal noise dosimetry for dock, conveyor and material-handling operations.
View Service →Total & Respirable Dust
Gravimetric particulate for bulk storage, damaged pallets and dry goods handling.
View Service →Mold & Indoor Air Quality
AIHA-EMLAP mold and IAQ testing for office and break-room space within the facility.
View Service →Asbestos (PLM/PCM)
NVLAP (bulk PLM) & PJLA (PLM/PCM) for legacy warehouse renovation or re-tenanting.
View Service →Warehousing & Distribution Analytes — OSHA vs ACGIH Limits
For several facility analytes the OSHA limit and the health-based guideline are far apart. Both are shown, since most operators now set internal triggers against the lower number. These are federal limits and apply in every state.
| Hazard | OSHA Limit | ACGIH / NIOSH | Lab Method |
|---|---|---|---|
| Carbon monoxide | 50 ppm TWA | ACGIH 25 ppm TWA | Direct-read / sorbent |
| Diesel particulate matter | No specific PEL | NIOSH REL 0.16 mg/m³ (elemental carbon) | NIOSH 5040 |
| Ammonia | 50 ppm TWA | ACGIH 25 ppm TWA / 35 ppm STEL | NIOSH 6015 |
| Total & respirable dust | 15 mg/m³ total · 5 mg/m³ respirable | — | Gravimetric (NIOSH 0500/0600) |
| Noise | 90 dBA TWA (AL 85 dBA) | NIOSH 85 dBA TWA | Personal dosimetry |
Turnaround Times & Sample Kits
From kit request to final report — rush options and what ships to your facility.
Program & Kit Support
- Pre-labeled sampling media scoped to your facility's hazards
- Calibrated pump loaner program for qualifying accounts
- Chain of Custody form, pre-filled with your info
- Kits ship to any facility in the U.S. with a prepaid return label
- Courier pickup and on-site CIH sampling across Texas, Oklahoma and Arkansas
- Standing-account setup for multi-site logistics networks
Who Relies on AGT for Warehousing & Distribution IH
Warehouse & Distribution Operators
Diesel exhaust, dust and noise monitoring across dock and storage floor areas.
Cold Storage & Refrigerated Logistics
Ammonia refrigeration monitoring for machine rooms and cold-storage floors.
3PL & Fulfillment Operators
Multi-tenant and third-party logistics facilities with recurring compliance monitoring needs.
IH & Safety Consultants
Third-party consultants who need an accredited lab partner with fast, consistent turnaround.
Legacy Building Operators
Asbestos PLM/PCM for warehouses converted from older industrial buildings.
Property & Facility Managers
Mold and IAQ testing for office and break-room space within logistics facilities.
Warehousing & Distribution IH Testing — FAQ
What IH testing do warehouses and distribution centers need?
Is this different from your Dallas-Fort Worth and San Antonio location pages?
Do you test for diesel exhaust from forklifts?
We run a cold-storage refrigeration system — do you test for ammonia?
Do you serve warehouses outside Texas?
Do older warehouse buildings need asbestos testing?
How fast is analysis and can you set up a standing account?
Set Up Warehousing & Distribution Monitoring — Request a Quote
AIHA-LAP accredited · diesel exhaust · ammonia · noise · dust · mold/IAQ · 1-day rush · kits shipped nationwide · standing-account pricing.