Power Generation & Utilities Industrial Hygiene Testing

Worker exposure monitoring for power plants, electric utilities and outage contractors — asbestos, welding fume, lead, hexavalent chromium and legacy PCBs analyzed in-house at our Houston lab, with 1-day rush and kits shipped anywhere in the U.S.

AIHA-LAP Accredited · LAP-101470 Asbestos NVLAP & PJLA 1-Day Rush · In-House Nationwide Ship-In
Why AGT

Why Power Plants & Utilities Run Their Monitoring With Us

Accredited & Defensible

AIHA-LAP and NVLAP/PJLA asbestos analysis that holds up with OSHA, insurers and regulators.

Legacy-Facility Ready

Asbestos, PCBs and lead for the older plants and substations most utilities still operate.

In-House, One Lab

Every analyte under one roof, one chain of custody, consistent methods across every site.

Outage-Ready 1-Day Rush

Same-day log-in before 2 PM CST and rush to 1 business day to stay ahead of a planned outage window.

Power Generation & Utilities · IH Laboratory

Exposure Monitoring for Generation Plants & Utility Maintenance

Power generation and electric utility facilities carry a distinct exposure profile shaped by their age and maintenance cycle — legacy asbestos insulation and gaskets, PCBs in older dielectric fluid and equipment, welding fume and hexavalent chromium from turbine and boiler maintenance, lead, and fly ash particulate. AGT Labs is the accredited industrial hygiene lab behind that monitoring, analyzing every sample in-house in Houston.

Generation and utility work happens nationwide, and the standards don't change with the zip code. We serve facilities anywhere in the United States — kits ship out, samples come back by prepaid return label, and analysis is identical wherever it was collected. Planned outages compress a large volume of work into a short window; we scope sampling plans in advance so results are back before the unit returns to service.

  • Asbestos (NVLAP bulk PLM; PJLA PLM/PCM) for legacy insulation and gaskets
  • Welding fume and metals by ICP-AES for turbine and boiler maintenance
  • Hexavalent chromium by OSHA ID-215 for stainless welding and coatings
  • Lead by NIOSH 7300 / 7082
  • PCBs in legacy dielectric fluid and pre-1979 building materials
  • Respirable/total dust including fly ash, and noise/heat stress
Built for Legacy Facilities
PLM/PCM
Asbestos bulk and air clearance for outage-driven insulation work
PCB
Legacy dielectric fluid and pre-1979 material analysis
50
States served — kits ship to any facility in the country
Analysis Scope

What We Analyze for Power Generation & Utility Sites

Every analyte below is run in-house under accreditation. Tap any card for the full method detail on our service pages.

Asbestos (PLM/PCM)

NVLAP (bulk PLM) & PJLA (PLM/PCM) for legacy plant insulation and gaskets.

View Service →

Welding Fume & Metals

ICP-AES for turbine, boiler and piping maintenance work.

View Service →

Hexavalent Chromium

OSHA ID-215 for stainless welding and protective coatings.

View Service →

Lead

NIOSH 7300 / 7082 for coated components and older equipment.

View Service →

PCBs in Legacy Equipment

Bulk and wipe-sample analysis for dielectric fluid and pre-1979 materials.

View Service →

Dust & Fly Ash

Gravimetric particulate for ash handling and combustion byproduct work.

View Service →

Noise & Heat Stress

Dosimetry and WBGT for turbine halls and boiler/furnace areas.

View Service →
IH Lab AccreditationAIHA-LAP · LAP-101470
AsbestosNVLAP & PJLA
Quality SystemISO/IEC 17025:2017
CoverageNationwide Ship-In
Lab Logistics

Turnaround Times & Sample Kits

From kit request to final report — rush options built around planned outage windows.

Turnaround Options & Surcharges
Standard Analysis
5+ Business Days
No Surcharge
4-Day Rush
4 Business Days
+25%
3-Day Rush
3 Business Days
+50%
2-Day Rush
2 Business Days
+75%
1-Day Rush
1 Business Day
+100%
Turnaround is counted from log-in at the lab — samples received before 2:00 PM CST are logged same day. Plan outage sampling in advance so results are back before the unit returns to service.

Program & Kit Support

  • Pre-labeled sampling media scoped to your outage or maintenance plan
  • Calibrated pump loaner program for qualifying accounts
  • Chain of Custody form, pre-filled with your info
  • Kits ship to any facility in the U.S. with a prepaid return label
  • Standing-account setup for recurring, multi-site utility monitoring
Download COC Form (.xls)
Who We Serve

Who Relies on AGT for Power Generation & Utility IH

Power Generation Plants

Fossil, gas-fired and legacy coal facilities with asbestos, fly ash and welding exposures.

Transmission & Distribution Utilities

Substation and equipment maintenance with legacy PCB and asbestos concerns.

Outage & Turnaround Contractors

Compressed maintenance windows needing fast, defensible results.

IH & Safety Consultants

Third-party consultants who need an accredited lab partner with fast, consistent turnaround.

Municipal & Cooperative Utilities

Standing-account monitoring across multi-site utility footprints.

Environmental & Abatement Firms

Asbestos and PCB clearance sampling for demolition and renovation projects.

Client Support

Power Generation & Utilities IH Testing — FAQ

What IH testing do power plants and utilities need?
The core analytes are asbestos in legacy insulation and gaskets (NVLAP bulk PLM; PJLA PLM/PCM), welding fume and metals from maintenance and outage work, respirable dust including fly ash, lead, hexavalent chromium from stainless welding and coatings, PCBs in older dielectric equipment, and noise/heat stress — all analyzed in-house under AIHA-LAP accreditation.
Do you test for PCBs in transformers and other legacy equipment?
Yes. Bulk and wipe-sample analysis for PCBs is available for legacy dielectric fluid, caulking and other pre-1979 building materials common at older generation and substation facilities. This is separate from asbestos analysis — tell us the material type and suspected contamination source so we scope the right method.
Do you serve power plants and utilities outside Texas?
Yes — facilities anywhere in the United States. Because every sample is analyzed at our Houston lab, results from a plant in the Midwest or Pacific Northwest are handled identically to one on the Gulf Coast. Kits ship with a prepaid return label, and samples received before 2:00 PM CST are logged the same day.
Why does asbestos testing matter so much for older power plants?
Boiler, turbine and piping insulation installed before the 1980s is frequently asbestos-containing, and outage and maintenance work routinely disturbs it. Bulk material sampling is performed under our NVLAP accreditation (101793-0, PLM only); PJLA additionally covers PLM and PCM air-clearance sampling for abatement and demolition projects.
Do you support outage and turnaround-style maintenance windows?
Yes. Planned outages compress a large volume of welding, insulation removal and confined-space work into a short window. We support rush turnaround down to 1 business day and can scope a sampling plan in advance of the outage so results are back before the unit returns to service.
Do you test fly ash and combustion byproduct dust?
Yes. Total and respirable particulate from fly ash handling, ash pond work and combustion byproduct management is analyzed gravimetrically, alongside any metals of concern in the ash by ICP-AES.
How fast is analysis and can you set up a standing account?
Standard turnaround is 5+ business days from log-in, with rush tiers down to 1 business day (+100%). Plants and utilities with recurring or multi-site monitoring run on a standing account with reserved capacity and a single point of contact.

Set Up Power Plant or Utility Monitoring — Request a Quote

AIHA-LAP accredited · asbestos NVLAP & PJLA · welding fume · lead · hex chrome · PCBs · 1-day rush · kits shipped nationwide · standing-account pricing.